How to prolong the life of your laminator?

August 10, 2018

As we all know, the electric motor is an important part of laminator. It can be said that the electric motor is the heart of the laminating machine. As the power source for the laminating machine, the maintenance of the motor is fundamental guarantee for your laminating works.

Proper operation will extend the life of the laminator, provide a higher utilization rate of the laminator, and most of important save you cost. Also relieve some burden for the manufacturer's after-sales service.

Then how to reduce the loss of the motor and extend the life of the laminating machine; today, the MEFU Laminator will give you some good advices.

 Zhengzhou Mefu CNC Equipment Co., Ltd.

1. Clean the dirt on the motor and keep away from flammable and explosive materials.

2. Before starting, check whether the machine rotates smoothly, whether it is stuck or blocked. If there is any abnormality, do not continue to start the laminating machine.

3. When starting, the voltage should meet the rated voltage. If the voltage is too high or low, it is not suitable to start the laminating machine; the general voltage value is about 5 to 10% of the rated voltage.

4. After the motor fails, be sure to cut off the power supply and stop use to get technicians fixed. The motor life depends on the standard operation of daily use and timely maintenance. Of course, the maintenance of other parts is also very important.

All in all, careful maintenance is a good way to extend the life of your laminator.